topic Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]# in Wireless

[root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Mon, 05 Jul 2021 14:42:37 GMT

Hi,

Please help for the error of my cmx below:

[root@localhost /]# cmxctl start
No installation was found, please install CMX.
[root@localhost /]#

Thank you.

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

Flavio Miranda — Mon, 02 Oct 2017 17:10:13 GMT

Hi,

Where are you running this command ? is this a VM ?

Is there an CMX installed there?

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Tue, 03 Oct 2017 03:49:16 GMT

in the the MSE 3365

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

Divya — Tue, 03 Oct 2017 04:34:06 GMT

Hi,

It might be due to corrupted installation. Please post "cmxctl status" from the affected box.

Regards,

Divya

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Tue, 03 Oct 2017 04:40:16 GMT

Hi,

Please see below:

[cmxadmin@localhost ~]$ cmxctl status
No installation was found, please install CMX.
[cmxadmin@localhost ~]$

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

Divya — Tue, 03 Oct 2017 04:41:56 GMT

It is corrupted installation. Please re-install CMX.

Regards,

Divya

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Tue, 03 Oct 2017 04:50:16 GMT

How to re-install? I thought it is already installed by Cisco when they
ship the MSE. I didn't do any installation for this. It should be ready out
of the box right?

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

Divya — Tue, 03 Oct 2017 05:41:35 GMT

Nope, You have to install the required software on Appliance MSE 3365.

1. Plug a monitor and keyboard to the Physical box

2. Boot the box

3. press "F8" for CIMC configuration on the prompted screen. (For initial setup CIMC utility will be used)

4.Select IP section and configure CIMC IP,subnet & GW IP.

5. Press F10 to save and Esc key to exit

Now, access CIMC using https://CIMC-IP and default credentials admin/password. After successful login, find KVM Console. It will be located under Server Summary pane under "Actions".

1. From KVM Console you need to enable virtual DVD, Virtual Media-> Activate Virtual Device and confirm the message.

2. Click CD/DVD and browse the image file. Now select, Map device

3. Under Virtual Media, you can view the mapped image

4. Reboot the system

5. While the system is booting, press F6 and get into Boot menu and select KVM "Mounted DVD" option

6. After this, the system will complete the install with no further input.

Once the ISO CMX has been mounted, the steps for actual installation is expained in the below document. refer "Installing a Cisco MSE virtual Appliance" section:

https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-3/installation/guide/installation_guide_103/installing_a_cisco_mse_virtual_appliance.html#task_197630952929660697614654441542633

Hope this helps!

Regards,

Divya

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Tue, 03 Oct 2017 09:03:22 GMT

Hi Divya,

Thanks for the reply. Where I can download the CMX.iso image?

Thank you.

Regards

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Tue, 03 Oct 2017 09:04:27 GMT

Hi,

I have only this file CISCO_CMX-10.3.1-35.cmx

Thank you.

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Wed, 04 Oct 2017 06:55:53 GMT

How long it will take for CMX to be installed in MSE3365? My side got an error of /bin/sh specified as full path. It stuck for almost one hour and not yet finish install the cmx software. Please advise.

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

Flavio Miranda — Wed, 04 Oct 2017 13:59:32 GMT

Hi,

MSE eirlier version used to come with CMX installed as part of the platform. Later on Cisco had splited in two differents platform. You could have MSE and CMX as separated platform.

Not sure if what you are trying to do is correct, as what I understood you are trynig to install CMX on a MSE appliance.

Dont you have any virtual machine available? Could be more easy.

which step are you in? Can you put a pic from your screen?

Re: [root@localhost /]# cmxctl start No installation was found, please install CMX. [root@localhost /]#

XEDLINUX — Wed, 04 Oct 2017 15:05:22 GMT

Hi All,

Thanks for your reply. Yes, I need to install a CMX into an MSE3365 box.

Solution: There is a bug of the latest firmware. Need to connect to SSH even if you are already connected to the kvm console.