topic Re: AP not taking the command in Wireless

AP not taking the command

Visauk47 — Mon, 05 Jul 2021 17:40:36 GMT

Hi Guys,

show ap dot11 5ghz summary -- cmd is not working in CLI, any idea why ?

And also can someone plz share some links where I can get some info on cli commands.

Re: AP not taking the command

Visauk47 — Tue, 09 Jul 2019 03:22:26 GMT

AP is 3702

Re: AP not taking the command

Sandeep Choudhary — Tue, 09 Jul 2019 05:28:00 GMT

I think it will work only if you have IOS-XE(3650/3850) devices who are managing LAPs.

Regards

Dont forget to rate helpful posts

Re: AP not taking the command

pieterh — Tue, 09 Jul 2019 12:47:31 GMT

it is not an AP CLI command but a controller CLI command.

More specific for converged access networks.

Converged access design uses switches with builtin controllers (models mentioned by Sandeep)

Depending on the ios software in the AP you can search for the other CLI commands.

lke this: Cisco IOS Configuration Guide for Autonomous Aironet Access Points Cisco IOS Release 15.2(4)JB3a

this link Configuring Radio Resource Management includes the command you query and contains some info about other CLI commands on 3850 switches for converged access

Re: AP not taking the command

Visauk47 — Tue, 09 Jul 2019 21:25:09 GMT

Thanks Sandeep.

Re: AP not taking the command

Visauk47 — Tue, 09 Jul 2019 21:25:56 GMT

Thanks pieterh