Cannot access WLC web MGMT.

msompong1 — Mon, 05 Jul 2021 19:21:01 GMT

Hi All,

I've convert the AP-1850 to Mobility Express mode with software Release 8.10.130.0 .

And after initial setup, I can access the WLC SSH and can ping the MGMT IP but I cannot access the Web interface

both http:// and https://

Below is my setting , Please kindly advise anything wrong or what is need to change for made it work.

Thank you.

(Cisco Controller) >show network summary

RF-Network Name............................. Testing-WLC
DNS Server IP1.............................. 208.67.222.222
DNS Server IP2.............................. 208.67.220.220
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Enable
Secure Web Mode SSL Protocol................ Disable
OCSP........................................ Disabled
OCSP responder URL..........................
Network 2-factor-authentcation.............. Disable
2FA Username field ..................... Common Name
Secure Shell (ssh).......................... Enable
Secure Shell (ssh) Cipher-Option High....... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
IPv4 AP Multicast/Broadcast Mode............ Multicast Address : 0.0.0.0
IPv6 AP Multicast/Broadcast Mode............ Multicast Address : ::
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds

--More-- or (q)uit
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
Mesh Backhaul RRM........................... Disable
AP Fallback ................................ Enable
AP EasyAdmin ............................... Disable
AP Virtual IP .............................. 10.1.0.6
Web Auth CMCC Support ...................... Disabled
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Web Auth Secure Web Cipher Option ......... Disable
Web Auth Secure Web Sslv3 ................. Disable

--More-- or (q)uit
Web Auth Secure Redirection ............... Enable
Web Auth AP Ethernet MAC in Redirection .... Disable
Fast SSID Change ........................... Enabled
Max WLAN Supported ......................... 512
IP/MAC Addr Binding Check .................. Enabled
Link Local Bridging Status ................. Disabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap local-network ......................... Enable
oeap-600 Split Tunneling (Printers)......... Disable
mDNS snooping............................... Disabled
mDNS Query Interval......................... 15 minutes
Web Color Theme............................. Default
Capwap Prefer Mode.......................... IPv4
Network Profile............................. Disabled
Client ip conflict detection (DHCP) ........ Disabled
Mesh BH RRM ................................ Disable
Mesh Aggressive DCA......................... Disable
Mesh Auto RF................................ Disable
HTTP Profiling Port......................... 80
HTTP-Proxy Ip Address....................... 0.0.0.0
HTTP-Proxy Port............................. 80
WGB Client Forced L2 Roam................... Disabled

--More-- or (q)uit
DHCP Timeout (seconds)...................... 120

(Cisco Controller) >

(Cisco Controller) >show interface detailed management

Interface Name................................... management
MAC Address...................................... 00:00:5e:00:01:01
IP Address....................................... 10.196.72.5
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.196.72.1
IP Address Type.................................. Static
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
Link Local IPv6 Address.......................... fe80::a2f8:49ff:fe84:3900/64
STATE ........................................... NONE
Primary IPv6 Address............................. ::/128
STATE ........................................... NONE
Primary IPv6 Gateway............................. ::
Primary IPv6 Gateway Mac Address................. 00:00:00:00:00:00
STATE ........................................... CREATING
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Physical Port.................................... 1
DHCP Proxy Mode.................................. Global
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured

--More-- or (q)uit
DHCP Option 82................................... Disabled
DHCP Option 82 bridge mode insertion............. Disabled
DHCP Option 6 Opendns Override................... Disabled
IPv4 ACL......................................... Unconfigured
IPv6 ACL......................................... Unconfigured
mDNS Profile Name................................ Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. N/A
L2 Multicast..................................... Enabled

Re: Cannot access WLC web MGMT.

Mark Elsen — Mon, 03 Aug 2020 08:46:51 GMT

- What error are you getting ?

Re: Cannot access WLC web MGMT.

msompong1 — Mon, 03 Aug 2020 09:04:52 GMT

Hi Marce1000,

I've got the timeout message from browser.

For more, I've tried with set up laptop in the same network as WLC MGMT and I able to connect with https.

So I'm not sure why cannot access from other network with https but ssh and ping work as expected.

Re: Cannot access WLC web MGMT.

Mark Elsen — Mon, 03 Aug 2020 09:55:44 GMT

- Try config network webmode enable

topic Re: Cannot access WLC web MGMT. in Wireless

Cannot access WLC web MGMT.

Re: Cannot access WLC web MGMT.

Re: Cannot access WLC web MGMT.

Re: Cannot access WLC web MGMT.