topic Re: Generating Heatmap through Cisco Prime in Wireless

Generating Heatmap through Cisco Prime

Muhammed Adnan — Mon, 05 Jul 2021 15:38:50 GMT

Hello Experts,

I am new to Prime.

Running Prime version 3.4. Added the maps and the Wireless Access Points on the maps. Whenever I try generating heatmap (Recompute),it say "Computing Heatmap" for few seconds but the resulting heatmap does not get generated.

Am I missing something?

Re: Generating Heatmap through Cisco Prime

Rasika Nayanajith — Sat, 19 May 2018 03:24:25 GMT

Is this happening to all the floors ? What is AP Tx power level shown in Prime in that floor ?

What is WLC software version you running ?

Sometime it may be below bug

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCve70752/?reffering_site=dumpcr

HTH

Rasika

Re: Generating Heatmap through Cisco Prime

Muhammed Adnan — Sat, 19 May 2018 08:03:31 GMT

Thanks Rasika,

It was my bad. My deployment was in a regulatory domain wherein 5 GHz is not allowed in wlc code. Changing it to 2.4 GHz /2.4 & 5GHz resulted in a heatmap.

Couple of additional queries 🙂

1) Is IDS feature not available for ELM mode APs (Local + WIPS)?

When ever I am trying to select IDS, it returns an warning message "No monitor-mode APs available".

2) Also once I enable WIPS submode on APs, I see error message "WIPS Alert: Reason "NoProfile" detected on AP MAC: , AP Name: "

Do I need to specifically create a profile for ELM mode APs for WIPS detection?

Re: Generating Heatmap through Cisco Prime

Muhammed Adnan — Tue, 22 May 2018 13:29:07 GMT

On the second query, figured out the response. We would need to have WIPS profile configured on the MSE through prime, which eventually gets moved to the APs through controller.

MSE has to be installed in the Network
Added to Prime and synchronized with Prime
APs has to be configured in Monitor or ELM (Local + WIPS) mode.
WIPS profiles are to be configured only through the Prime. Service > Mobility Services > wIPS Profiles.
Once the WIPS profile is created, it will be pushed to the WLC and eventually to the Monitor / ELM mode APs.