Issue setting Primary Controller IP Address on Prime 2.0

Willem de Groot — Mon, 05 Jul 2021 07:42:25 GMT

Hi all,

I have a problem with a AP template on Prime 2.0.

I have a WLC pair (7.4.121.0) setup as N+1.
Now on the Prime (2.0) I created a Lightweight AP Configuration Template, setting the Primary and Secondary Controller name (from Dropdown) and pasted the IP Addresses of these controllers to the appropriated fields.

I also set the AP Failover Priority to Medium.

That is all in the template.

Saved the template. Selected (the only) one AP on this WLC's to apply the template. hit Apply, status says "Success".

Checking the AP, the controllers and Failover Prio are set but the IPAddress fields are empty.

Back to the Prime template, the IP Adresses are set to 0.0.0.0 again.

Whats wrong here?

thanks
Willem

I am also facing this trouble

LAN Operations — Tue, 12 Aug 2014 17:50:30 GMT

I am also facing this trouble.. Can anyone have solution to this problem ??

Hi Cumminslan,No, I do not

Willem de Groot — Wed, 13 Aug 2014 06:16:39 GMT

Hi Cumminslan,

No, I do not have a solution for this.

topic Hi Cumminslan,No, I do not in Wireless

Issue setting Primary Controller IP Address on Prime 2.0

I am also facing this trouble

Hi Cumminslan,No, I do not