topic Re: mobility express not show captive protal in Wireless

mobility express not show captive protal

info@toyoseikan.co.th — Mon, 05 Jul 2021 16:35:32 GMT

I config SSID Guest portal and try to client connect after that browser not show page login user and password.
try via Chrome, Firefox, IE can't show page login but Dolphin can show page login after Except Certification.

Re: mobility express not show captive protal

Kasun Bandara — Fri, 14 Dec 2018 16:48:46 GMT

What is the OS version? And are you enabled DNS traffic from users to outside before Auth? because that need to make sure controller detect users traffic.

Re: mobility express not show captive protal

info@toyoseikan.co.th — Mon, 17 Dec 2018 02:30:39 GMT

Mobility Express Version 8.7

and how to check enabled DNS traffic from users to outside before Auth?

Thank you again.

Re: mobility express not show captive protal

Kasun Bandara — Mon, 17 Dec 2018 04:00:34 GMT

hi,

1 - controller need to have internet

2 - user network or firewall should allow DNS traffic to internet

Re: mobility express not show captive protal

info@toyoseikan.co.th — Mon, 17 Dec 2018 09:33:57 GMT

1. correct i allow any to any
2. same 1 allow any to any

Re: mobility express not show captive protal

Kasun Bandara — Mon, 17 Dec 2018 13:39:06 GMT

is that worked?

Re: mobility express not show captive protal

sudhir.gupta1 — Mon, 17 Dec 2018 15:29:53 GMT

Hi,

R u able to ping that ip ?

if yes then , try https:// ip address

if not try to reconfigure again.

Also, FYI. It requires 2 ip address 1 for the AP and 1 for the ME Controller.(both ip address should be different)

Make sure you are pinging ME controller IP Address

Rgds/Sudhir