topic mobilty express to capwap in Wireless

mobilty express to capwap

nikhilcherian — Mon, 05 Jul 2021 15:26:44 GMT

What does the below command do

config ap unifiedmode <switch_name> <switch_ip_address>

If I execute this command from the an mobility express AP, does it convert the current AP also to capwap

Regards

Nikhil

Re: mobilty express to capwap

Flavio Miranda — Thu, 29 Mar 2018 17:20:26 GMT

Nop. This command must be ran on the wlc and is suitable for many APs.

For one AP use the command "ap-type capwap"

-If I helped you somehow, please, rate it as useful.-

Re: mobilty express to capwap

nikhilcherian — Fri, 30 Mar 2018 07:50:43 GMT

My issue is like this, I have already mounted the access point in a remote location. Now I don't have the console access to the AP. How can I convert the AP to the capwap

As per my understanding when mobility express AP come up, the AP will look for a master controller, if master controller is not available, the AP will go into the initial configuration for the controller. Is there any way I can telnet/ssh to the AP at this moment.

or if connect to the SSID CiscoAirProvison is there any way I can convert to capwap

Regards

Nikhil