topic Re: 2820i Mobility express LAG configuration in Wireless

2820i Mobility express LAG configuration

illusion_rox — Mon, 05 Jul 2021 14:52:18 GMT

Hi all,

as per technote, if we want to configure LAG, 2820i is compatible with few cisco models only (3850/3650) etc.

Why is that so, isnt LAG = LACP?

Re: 2820i Mobility express LAG configuration

Flavio Miranda — Wed, 15 Nov 2017 16:09:35 GMT

Hi @illusion_rox

Kinda is. Let's say it is a subset of real Link Aggregation as it does not allow you to select mode.

-If I helped you somehow, please, rate it as useful.-

Re: 2820i Mobility express LAG configuration

illusion_rox — Wed, 15 Nov 2017 17:54:48 GMT

If the only issue is mode, it should still be compatible with 2960x series ? or any other 3rd party switch supporting LACP?

Re: 2820i Mobility express LAG configuration

Flavio Miranda — Wed, 15 Nov 2017 17:58:46 GMT

If you setup the switch to mode on, this should work.

-If I helped you somehow, please, rate it as useful.-

Re: 2820i Mobility express LAG configuration

illusion_rox — Wed, 15 Nov 2017 18:36:29 GMT

My confusion is, 2960x and 3650/3850 supports LACP. What does 3650/3850 supports in term of LAG that 2960x doesnt ?

Re: 2820i Mobility express LAG configuration

Vengatesa Prasath — Thu, 16 Nov 2017 13:46:17 GMT

Hi,

LAG with 3rd party switches has not been tested. AP uses same IP address but different source port to do the balancing, so the switch should be able to do load balancing based on UDP port information. For more information on LAG with 3rd party switch please refer to bug CSCvf77787.

Please refer:

https://techzone.cisco.com/t5/Access-Points/LAG-on-1800-2800-3800-AP/ta-p/1007165

**************** Please rate Useful posts********************

Re: 2820i Mobility express LAG configuration

illusion_rox — Sun, 19 Nov 2017 16:52:30 GMT

Its not 3rd party problem. Cisco’s own 2960x series are not supporting LAG