topic Convert 1852 from Mobility Express to Lightweight in Wireless

Convert 1852 from Mobility Express to Lightweight

mbrozovich1 — Mon, 05 Jul 2021 12:41:24 GMT

I have a 1852i that I would like to manage via a WLC 2504. Is there a procedure to convert the AP?

Converting a Mobility Express

Leo Laohoo — Sun, 21 Aug 2016 03:11:20 GMT

Converting a Mobility Express AP into a CAPWAP AP

Convert 1852 from Mobility Express to Lightweight

SarathSasidharan24326 — Wed, 25 Nov 2020 11:51:46 GMT

I have 1852i access point with ME image, i need to load Capwap image. i tried multiple ways including mode button option, but no luck. anyone faced this issue before

Re: Convert 1852 from Mobility Express to Lightweight

robinsinghal271 — Sat, 27 Aug 2022 11:47:12 GMT

Hi @SarathSasidharan24326

I know this is late but better than never. Anyway below is your solution.

First way, you can convert your ME image into CAPWAP with command "ap-type CAPWAP" in Privilege mode. Now AP will work as a CAPWAP.

Another way if you are looking to install lightweight image in AP then you may load it via tftp server. Follow below procedure.

Step1. Assign IP address to your AP with command "capwap ap ip <ip address> <subnet mask> <default gateway>

Step2. Check connectivity between tftp server and AP using "ping"

Step3. After successful reachability use command "archive download-sw /reload tftp://<tftp server ip add>/<image file>"

Now image will start to load and will reboot once. Login with default username: Cisco and password: Cisco

Thanks

Robin