topic They are supported as of v8.1 in Wireless https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884243#M110484 <P dir="ltr">They are supported as of v8.1.122.0</P> <P dir="ltr"></P> <P dir="ltr">http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html</P> Mon, 29 Feb 2016 08:23:25 GMT marc.groenen 2016-02-29T08:23:25Z My AP 1830 is located at branch office but I do not want to deploy it in express mobility mode. Can my AP 1830 operate as local mode and communicate with my centralized controller at HQ and DR? https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884240#M110481 <P>My AP 1830 is located at branch office but I do not want to deploy it in express mobility mode. Can my AP 1830 operate as local mode and communicate with my centralized controller at HQ and DR? My customer do not want distribute mobility express controller across branch site.</P> Mon, 05 Jul 2021 11:38:39 GMT https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884240#M110481 boonsue_pat 2021-07-05T11:38:39Z Jup depending on the software https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884241#M110482 <P>Jup depending on the software version of the WLC</P> <P></P> <P>http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82.html#pgfId-1321954</P> Fri, 26 Feb 2016 11:22:46 GMT https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884241#M110482 marc.groenen 2016-02-26T11:22:46Z Does this mean wlc version 8 https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884242#M110483 <P>Does this mean wlc version 8.2 support local mode. Then I can deploy AP1830 with local mode at branch.</P> Sun, 28 Feb 2016 07:42:31 GMT https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884242#M110483 boonsue_pat 2016-02-28T07:42:31Z They are supported as of v8.1 https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884243#M110484 <P dir="ltr">They are supported as of v8.1.122.0</P> <P dir="ltr"></P> <P dir="ltr">http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html</P> Mon, 29 Feb 2016 08:23:25 GMT https://community.cisco.com/t5/wireless/my-ap-1830-is-located-at-branch-office-but-i-do-not-want-to/m-p/2884243#M110484 marc.groenen 2016-02-29T08:23:25Z