topic SNMP "Access Point" Lightweight WLC 5508 in Wireless

SNMP "Access Point" Lightweight WLC 5508

RICARDO SANCHEZ — Mon, 05 Jul 2021 09:36:18 GMT

Hello

It is possible to configure SNMP in an AP lightweight with WLC 5508 to get some information with snmpwalk as a AP Serial number?

Thanks for your help

Regards

Leo Laohoo — Wed, 25 Feb 2015 04:10:12 GMT

It is possible to configure SNMP in an AP lightweight with WLC 5508 to get some information with snmpwalk as a AP Serial number?

Yes and no.

The details of the S/N are all found in the WLC. So if you need to do an SNMPwalk, do it on the WLC.

RICARDO SANCHEZ — Thu, 26 Feb 2015 21:14:23 GMT

Leo

Thanks for your reply.

What if an AP is in flexconnect and I need to poling with an CiscoPrime.

It is possible to configure an AP with SNMP?

Thanks for your help

Regards.

Leo Laohoo — Thu, 26 Feb 2015 22:07:34 GMT

Same thing. APs will "only talk to" the WLC. If you want to pull data, then the WLC is the only place to go. This is what we've done.