topic Re: EAP-TTLS in Wireless https://community.cisco.com/t5/wireless/eap-ttls/m-p/520057#M11133 <HTML><HEAD></HEAD><BODY><P>Hi Rene,</P><P></P><P>yes, the use of WEP and WPA depends only on your Chipset and Driver, use the latest Version. I had a lot of trouble especially with older Intel Drivers ...</P><P></P><P>All other Supplicants for EAP-TTLS are commercial, so i think securew2 is the choice. It has good capabilities for automated provision of configuration files, we have implemented it in a large Campus Environment with 3000 Users.</P><P></P><P>Regards, Michael</P></BODY></HTML> Mon, 21 Aug 2006 07:44:25 GMT MICHAEL SCHROEDER 2006-08-21T07:44:25Z EAP-TTLS https://community.cisco.com/t5/wireless/eap-ttls/m-p/520056#M11132 <P>I am getting ready to setup EAP-TTLS and I have a few questions.</P><P></P><P>Can I use both wep and wpa for encryption on the AP while using EAP-TTLS?</P><P></P><P>Do you recommend other WPA_Supplicants aside from securew2 for Windows XP?</P><P></P><P>Do you know of a configuration document that point how to configure the AP1200 series for EAP-TTLS? I have a AP1231G?</P><P></P><P>tx, rene</P> Sun, 04 Jul 2021 19:52:45 GMT https://community.cisco.com/t5/wireless/eap-ttls/m-p/520056#M11132 renedplgr 2021-07-04T19:52:45Z Re: EAP-TTLS https://community.cisco.com/t5/wireless/eap-ttls/m-p/520057#M11133 <HTML><HEAD></HEAD><BODY><P>Hi Rene,</P><P></P><P>yes, the use of WEP and WPA depends only on your Chipset and Driver, use the latest Version. I had a lot of trouble especially with older Intel Drivers ...</P><P></P><P>All other Supplicants for EAP-TTLS are commercial, so i think securew2 is the choice. It has good capabilities for automated provision of configuration files, we have implemented it in a large Campus Environment with 3000 Users.</P><P></P><P>Regards, Michael</P></BODY></HTML> Mon, 21 Aug 2006 07:44:25 GMT https://community.cisco.com/t5/wireless/eap-ttls/m-p/520057#M11133 MICHAEL SCHROEDER 2006-08-21T07:44:25Z Re: EAP-TTLS https://community.cisco.com/t5/wireless/eap-ttls/m-p/520058#M11134 <HTML><HEAD></HEAD><BODY><P>If you have previously configured FreeRadius/Ldap to return the AV pair (SSID permit list) to the AP, please kindly share a sample config that lists how it was accomplished. </P><P></P><P>tx, -Rene</P></BODY></HTML> Mon, 28 Aug 2006 22:34:13 GMT https://community.cisco.com/t5/wireless/eap-ttls/m-p/520058#M11134 renedplgr 2006-08-28T22:34:13Z