WLC CLI Configuration

Sreenath — Mon, 05 Jul 2021 15:32:48 GMT

I would like to know if there is any reference for a good end to end WLC CLI Configuration tool or guide or reference.

I am currently turnning up a WLC using the initial config bu assigning an IP address for management and then, configuring the WLC via GUI.

I would like the ability to do it via CLI. Can someone share the sequence in which commands should go in?

Re: WLC CLI Configuration

Rasika Nayanajith — Fri, 20 Apr 2018 22:18:37 GMT

Hi Sreenath,

Here is a comprehensive list of WLC commands references

https://www.cisco.com/c/en/us/support/wireless/wireless-lan-controller-software/products-command-reference-list.html

I would suggest you to pick one feature & then see how you can configure it using CLI. Here is some reference posts from my blog that may be useful when learning WLC CLI configs

https://mrncciew.com//?s=via+CLI&search=Go

HTH

Rasika

*** Pls rate all useful responses ***

topic WLC CLI Configuration in Wireless

WLC CLI Configuration

Re: WLC CLI Configuration