topic Re: How i can copy config. from WLC to another ? in Wireless

How i can copy config. from WLC to another ?

Murad* — Mon, 05 Jul 2021 15:31:04 GMT

i have 2 WLC first one 2504 and the second 5508 ,

how i can copying config. from 2504 to 5508 ?

best regards

Re: How i can copy config. from WLC to another ?

Sandeep Choudhary — Mon, 16 Apr 2018 09:25:37 GMT

Answer is yes you can but Make sure both WLCs are the same version!!!

If not on smae version then start the new WLC config from scratch.

Regards

Dont forget to rate helpful posts

Re: How i can copy config. from WLC to another ?

Murad* — Mon, 16 Apr 2018 12:48:31 GMT

did you mean the same firmware version or device version ?

Re: How i can copy config. from WLC to another ?

Sandeep Choudhary — Mon, 16 Apr 2018 13:05:13 GMT

firmware version on WLCs must be same.

Regards

Dont forget to arte helpful posts

Re: How i can copy config. from WLC to another ?

patoberli — Mon, 16 Apr 2018 13:45:46 GMT

I suggest to setup the new one in parallel and then go through all options, screen by screen. That way you will also see new/different options, which the newer/bigger hardware offers.

Re: How i can copy config. from WLC to another ?

Scott Fella — Mon, 16 Apr 2018 14:19:29 GMT

Let me chime in... you can export the configuration from one controller and edit the file because you will need to change your hostname and ip address unless doing a replacement. Now, one thing to note is that some of the configurations will fail because of the port difference between the 2504 and 5508. In the end, you still want to run a diff between the two configuration files and or go through the GUI like what was mentioned already to confirm your setting are the same. I have done this with different code versions, but with newer versions, there are new features that you will need to look into. Keep those disabled if you don't know what they are.