topic WGB and EAP-FAST in Wireless https://community.cisco.com/t5/wireless/wgb-and-eap-fast/m-p/503787#M11222 <P>I try to authenticate a 1300 Worgroup bridge with EAP-FAST. </P><P>Using ACS 3.3(2) Build 2 and 1231 AP's with WDS.</P><P>Is there anyone who has tried this configuration. Ordinary wireless clients are OK.</P><P></P> Sun, 04 Jul 2021 18:18:45 GMT t.notland 2021-07-04T18:18:45Z WGB and EAP-FAST https://community.cisco.com/t5/wireless/wgb-and-eap-fast/m-p/503787#M11222 <P>I try to authenticate a 1300 Worgroup bridge with EAP-FAST. </P><P>Using ACS 3.3(2) Build 2 and 1231 AP's with WDS.</P><P>Is there anyone who has tried this configuration. Ordinary wireless clients are OK.</P><P></P> Sun, 04 Jul 2021 18:18:45 GMT https://community.cisco.com/t5/wireless/wgb-and-eap-fast/m-p/503787#M11222 t.notland 2021-07-04T18:18:45Z Re: WGB and EAP-FAST https://community.cisco.com/t5/wireless/wgb-and-eap-fast/m-p/503788#M11223 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>a workgroup bridge support only LEAP als EAP Client for EAP authentication.</P><P>You have no option to integrate a PAC File to the device in workgroup bridge mode.</P><P></P><P>Look at this link:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804158b3.html#wp1055422" target="_blank">http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804158b3.html#wp1055422</A></P></BODY></HTML> Thu, 10 Nov 2005 08:56:04 GMT https://community.cisco.com/t5/wireless/wgb-and-eap-fast/m-p/503788#M11223 sbrunst 2005-11-10T08:56:04Z