topic Re: what the basic configuration of WLC 2504 and AP 1142 ? in Wireless

what the basic configuration of WLC 2504 and AP 1142 ?

Murad* — Mon, 05 Jul 2021 14:59:48 GMT

i have problem in my work from 6 days ago

the AP1142 cannot join to the WLC2504

what is the basic config. to this devices ?

to i know if my config is the reason of this problem .

thank you

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Flavio Miranda — Tue, 19 Dec 2017 14:55:11 GMT

Hi @Murad*

Actually the AP should connect with no previous config. What you need make sure is compatibility in the first place.

Which version is your wlc?

-If I helped you somehow, please, rate it as useful.-

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Murad* — Tue, 19 Dec 2017 16:32:44 GMT

i have WLC 2504 can work with just 15 AP

i want to deploy this AP in my company and control it from WLC , i have cisco sw 3750 poe with DHCP config. , firstly i config my WLC with manaegemnt ip and set his time and complete all firstly config from console , then i can access to WLC from GUI after that i upgrade the system version to compatabil with my AP 1142 so sys. ver. became 8.3.102 , but my problem now that is AP cannot join with WLC , and this is full info. about WLC and AP :

(Cisco Controller) >show sysi

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.3.102.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 20.0

OUI File Update Time............................. Sun Sep 07 10:44:07 IST 2014

Build Type....................................... DATA + WPS

System Name...................................... JWLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 10.10.10.2
IPv6 Address..................................... ::
Last Reset....................................... Software reset
System Up Time................................... 0 days 0 hrs 25 mins 35 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5

--More-- or (q)uit
System Stats Normal Interval..................... 180

Configured Country............................... GB - United Kingdom
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +33 C
External Temperature............................. +36 C
Fan Status....................................... 3500 rpm

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0

OUI Classification Failure Count................. 0

Burned-in MAC Address............................ F8:A5:C5:85:C7:20
Maximum number of APs supported.................. 75
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1/SHA2

Ap 1142 :

APfc99.47df.b22d#sh version
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 15.3(3)JD5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Sun 28-May-17 16:20 by prod_rel_team

ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)

APfc99.47df.b22d uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:/c1140-k9w8-mx.153-3.JD5/c1140-k9w8-xx.153-3.JD5"
Last reload reason:

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1142N-E-K9 (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FCZ1635W0NS
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
LWAPP image version 8.3.121.0
1 Gigabit Ethernet interface
2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: FC:99:47:DF:B2:2D
Part Number : 73-12836-05
PCB Serial Number : FOC1634FWXS
Top Assembly Part Number : 800-33775-04
Top Assembly Serial Number : FCZ1635W0NS
Top Revision Number : A0
Product/Model Number : AIR-LAP1142N-E-K9

Configuration register is 0xF

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Flavio Miranda — Tue, 19 Dec 2017 17:23:17 GMT

Did you activate the wlc license?

-If I helped you somehow, please, rate it as useful.-

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Murad* — Tue, 19 Dec 2017 17:42:20 GMT

How i can doing that ?
But When i show license from WLC the are alot of license and its activate.

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Flavio Miranda — Tue, 19 Dec 2017 20:08:33 GMT

If the license is activated then Id recommend you to take a look on the AP regulatory domain. In your case is the -E.

Make sure you have the correct Country enable on the WLC.

Take a look on the following link:

http://www.wificert.org/regulatory-domains/

-If I helped you somehow, please, rate it as useful.-

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Leo Laohoo — Tue, 19 Dec 2017 20:16:14 GMT

Hmmmm ... Software reset.
Post the WLC command "sh time".

Reboot the controller again.

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Murad* — Tue, 19 Dec 2017 20:27:26 GMT

how i can take a look to the AP regulatory domain ?
and how i can chose the correct choice ?

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Murad* — Tue, 19 Dec 2017 20:29:35 GMT

Cisco Controller) >show time

Time............................................. Sun Dec 17 15:03:19 2017

Timezone delta................................... 0:0
Timezone location................................

NTP Servers
NTP Polling Interval......................... 600

Index NTP Key Index NTP Server Status NTP Msg Auth Status

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Leo Laohoo — Tue, 19 Dec 2017 20:39:37 GMT

Configure NTP server and see what happens.
I'm suspecting the time and date of the controller is incorrect.

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Murad* — Tue, 19 Dec 2017 20:43:56 GMT

Can you giving to me any trusted ip of ntp server ?

Re: what the basic configuration of WLC 2504 and AP 1142 ?

Leo Laohoo — Tue, 19 Dec 2017 21:54:26 GMT

pool.ntp.org