topic WLC AP License update problem in Wireless

WLC AP License update problem

naimul.khair@smart-bd.com — Mon, 05 Jul 2021 14:55:18 GMT

Dear Experts,

I am facing trouble on installing AP adder license in Cisco WLC (2504). After installing the license in the WLC (2504) it shows "Installation Process Completed (2 license(s) failed;)". The base license status in Licenses under Software Activation is "Active, Not in Use" but it suppose to be "Not in Use".

I have changed the OS from 8.2.166.0 to 8.2.151.0 but the problem remains same. I have also reset the WLC and re-configured the WLC but still I couldn't able to solve the problem.

I have attached 2 screenshots for your clarification.

Thanks in Advance.

Re: WLC AP License update problem

Sandeep Choudhary — Tue, 28 Nov 2017 06:08:05 GMT

Hi,

Make sure the license was an addr license. Also you can open up the license file and verify the serial number of the controller. If that is not matching your controller serial the license would fail. You should open a TAC case with licensing as they can regenerate a new license file if the one you have is wrong.

Regards

Dont forget to rate helpful posts

Re: WLC AP License update problem

Vengatesa Prasath — Sat, 02 Dec 2017 15:40:44 GMT

Hi,

Do you have two license file? screenshot shows as "2 license(s) failed"

Can you post the license file that you tried to install.

I can see 5 AP license on the WLC... How much AP count you are trying to add?

************ Please rate helpful posts************

Re: WLC AP License update problem

naimul.khair@smart-bd.com — Sat, 09 Dec 2017 04:06:12 GMT

Thank you for your reply.

The problem is solved. Cisco has provided a new license file.