topic Syslog fetching secondary WLC logs in Wireless

Syslog fetching secondary WLC logs

shreyasathavale — Mon, 05 Jul 2021 14:47:44 GMT

We have a typical SSO WLC architecture in our network and a configured syslog server. But from the past few days, we are receiving logs from the Hot-standby WLC instead of the active primary WLC.

Also, the logs from the hot-standby WLC are not full in size, they are the minimal ones.

Our WLC's are on version 8.2.151.0.

Can anyone help?

Re: Syslog fetching secondary WLC logs

Divya — Thu, 02 Nov 2017 05:13:21 GMT

Hi,

That is expected, the Secondary WLC will communicate to Syslog & NTP server using the Redundancy-management IP.

However, it shouldn't affect the Primary WLC syslog logging details. Please double confirm that you don't see any messages on Syslog from the Primary WLC?

Regards,

Divya

Re: Syslog fetching secondary WLC logs

shreyasathavale — Thu, 02 Nov 2017 06:41:30 GMT

yeah, i agree to you that the secondary should also send the logs.

The only problem here is we are not receiving a single log file from the primary one.

We also tested configuring a local syslog server (my machine) and configuring it in the primary WLC.

Unfortunately, the logs which were fetched on my machine through tftps were from the secondary one.

Re: Syslog fetching secondary WLC logs

Divya — Thu, 02 Nov 2017 06:59:23 GMT

Hmmm.. That's weird!

Both of the Controllers are configured for the same Syslog server? Is the logging level is configured as required?

Was there any recent upgrade/changes on WLC?

Regards,

Divya

Re: Syslog fetching secondary WLC logs

shreyasathavale — Thu, 02 Nov 2017 08:17:46 GMT

Yes, both the controllers are pointed towards a single syslog server.
We upgraded our WLC to 8.2.151.0 a month ago.
But even after the upgrade we were receiving logs from the primary WLC, it stopped a week ago.

Re: Syslog fetching secondary WLC logs

Divya — Thu, 02 Nov 2017 08:32:57 GMT

Alright!

Please delete and re-add the same Syslog server. Enable the logging level as "7" and then check.

Regards,

Divya