https://community.cisco.com/t5/wireless/eap-tls-not-working/m-p/391131#M11321 <P>Hello,</P><P></P><P>I have deployed PEAP working well, but not able to make EAP-TLS work. I've followed the deployment guide from Cisco. I can't see anything in the ACS log, and with a debug radius in the AP i can only see a loop sending Access-request and Access-Challenge all the time. I can't see the exchange of certificates between the ACS and the supplicant. I have XP SP2 installed, maybe a problem with SP2?</P><P>Should I issue the certificate of the client to the same person who is actually logged in the machine? Should I put a domain in the supplicant?</P><P>I'm using ACS database authentication.</P><P></P><P>If you need more info please let me know.</P><P></P><P>Thanks,</P><P></P><P>Ruben</P> Sun, 04 Jul 2021 17:21:34 GMT ruben.montes 2021-07-04T17:21:34Z https://community.cisco.com/t5/wireless/eap-tls-not-working/m-p/391131#M11321 <P>Hello,</P><P></P><P>I have deployed PEAP working well, but not able to make EAP-TLS work. I've followed the deployment guide from Cisco. I can't see anything in the ACS log, and with a debug radius in the AP i can only see a loop sending Access-request and Access-Challenge all the time. I can't see the exchange of certificates between the ACS and the supplicant. I have XP SP2 installed, maybe a problem with SP2?</P><P>Should I issue the certificate of the client to the same person who is actually logged in the machine? Should I put a domain in the supplicant?</P><P>I'm using ACS database authentication.</P><P></P><P>If you need more info please let me know.</P><P></P><P>Thanks,</P><P></P><P>Ruben</P> Sun, 04 Jul 2021 17:21:34 GMT https://community.cisco.com/t5/wireless/eap-tls-not-working/m-p/391131#M11321 ruben.montes 2021-07-04T17:21:34Z