topic Got it. And I find those in Wireless

WLC remove trunk config

afsharki2 — Mon, 05 Jul 2021 13:20:39 GMT

Hello, I might be asking the wrong question here because I know nothing of the WLC.

I am using a 5500 Series Wireless LAN Controller. I have a switch connected to the wlc in which I would like to remove a vlan that is not in use anymore. I have done this on the switch end port-channel, but how do I do this on the WLC end? Do WLCs even use port-channels?

Thank you

only thing you have to do on

Rasika Nayanajith — Wed, 11 Jan 2017 18:33:11 GMT

only thing you have to do on WLC end is remove dynamic interface created on those specific vlans that you do not require any longer on WLC

HTH

Rasika

*** Pls rate all useful responses ***

Got it. And I find those

afsharki2 — Wed, 11 Jan 2017 18:35:07 GMT

Got it. And I find those vlans by doing a "sh int summary" ?

YES

Rasika Nayanajith — Wed, 11 Jan 2017 18:37:07 GMT

YES