topic Here is the CLI config in Wireless

how to Assign vlan per port all cisco access point 702w by wlc 5508

kettepong — Mon, 05 Jul 2021 13:05:01 GMT

My environment have WLC 5508 and ap 702w 250 units in my site. I need to config port all ap 702w example port 2 >> Vlan 20 port 3 >> vlan 30

Now i canfig one by one.

Please everyone tell me better way for config one time 250 units.

thank you a lot..

You can configure multiple

tadnan001 — Thu, 03 Nov 2016 04:22:48 GMT

You can configure multiple APs with Prime templates:

check attached pic. It has link to templates as well as where to insert VLAN details in template.

Fill in rest of template with required information.

Save template and move to selection section and choose your AP's by puting 702W in model column (or use any other selection criteria that suits your environment, e.g. subnet range etc.)

Thank you for answer but my

kettepong — Thu, 03 Nov 2016 04:53:00 GMT

Thank you for answer but my site not have Prime can you tell me how else ?

Here is the CLI config

Rasika Nayanajith — Thu, 03 Nov 2016 05:43:06 GMT

Here is the CLI config involved. If you have list of your AP names you can workout CLI config for all your AP on notepad & then configure this via CLI

config ap lan port-id <port_id> enable <AP_Name>
config ap lan enable access vlan <vlan_no> <port_id> <AP_Name>

Refer this post for more details

https://mrncciew.com/2014/09/26/702w-with-wlc-8-0/

HTH

Rasika

*** Pls rate all useful responses ***

Dear K.Rasika Nayanajiththank

kettepong — Thu, 10 Nov 2016 15:26:15 GMT

Dear K.Rasika Nayanajith

thank you very much for this command i use in excel first and copy to wlc it work!!.

Glad to hear it and thanks

Rasika Nayanajith — Thu, 10 Nov 2016 19:12:02 GMT

Glad to hear it and thanks for rating our responses as well.

Rasika