topic AP disassociated from WLC in Wireless

AP disassociated from WLC

nurulsyuhada.roselan — Mon, 05 Jul 2021 12:29:53 GMT

Hi,

I have problem here regarding my cisco 1600 aironet AP. It always reboot itself with this command. All AP that connected on this WLC face same issue. My WLC now running 8.1.131.0 software version. The AP connected by using POE.

Mon Jul 25 15:54:11 2016

AP 'xxxxxx', MAC: 40:a6:e8:30:5b:50 disassociated previously due to Link Failure. Uptime: 9 days, 18 h 37 m 35 s . Reason: Capwap WTP Event request.

Hi Nurul,

asifimran38 — Mon, 25 Jul 2016 10:04:57 GMT

Hi Nurul,

1st:

According to your issue please check,

Show power inline

command on your switches and check your switches produced proper power or not if the power is there and those AP's are connected and getting power according to access point requirement and your cable length should be less then 70 meters then do 2nd activity.

2nd :

this version have a bug that's why you faced this issue please downgrade your version with the CISCO suggested version 8.0.133