topic Thank you Leo, but what is in Wireless

How to check LAP radio power level on WLC via CLI ?

DuJin0509 — Mon, 05 Jul 2021 12:16:29 GMT

Hello everyone,

A customer complained the his WIFI access quality is bad , Our 3rd line engineer suppose the AP power is low , and the TPC settings for AP B281-01 on both the radios have been set to Global, what is meaning of "Global" ?

How can I check radio power level on WLC via CLI please ?

Thank you .

You can issue a show advanced

Scott Fella — Wed, 22 Jun 2016 03:42:26 GMT

You can issue a show advanced 802.11a txpower or for 2.4ghz, use 802.11b

-Scott

*** Please rate helpful posts ***

How can I check radio power

Leo Laohoo — Wed, 22 Jun 2016 03:44:32 GMT

How can I check radio power level on WLC via CLI please ?

Several methods of doing this:

1. sh ap config <802.11a/802.11b> summary

2. grep include "Power Level" "sh ap auto-rf <802.11a/802.11b> <AP name>".

Thank you Leo, but what is

DuJin0509 — Wed, 22 Jun 2016 03:50:07 GMT

Thank you Leo, but what is the meaning of "Global" , could you please explain it to me ?

Thank you Leo, but what is

Leo Laohoo — Wed, 22 Jun 2016 03:58:30 GMT

Thank you Leo, but what is the meaning of "Global"

Global means "all the APs" will get the same configuration item from the controller. Tx Power & DCA are two settings which are set to automatic, "Global" channel assignment & "Global" power control, as well as user can individually set the APs Tx Power & channel assignment.

thank you for your answer.

DuJin0509 — Wed, 22 Jun 2016 04:40:26 GMT

thank you for your answer.

Thank you .

DuJin0509 — Wed, 22 Jun 2016 04:41:34 GMT

Thank you .