topic Do I need a WLC for Client Roaming? in Wireless

Do I need a WLC for Client Roaming?

Tim K — Mon, 05 Jul 2021 12:01:18 GMT

I currently have a Cisco AP running in adhoc mode. I want to expand my coverage in my house, and allow for seamless roaming. Do I need a WLC to do that? Or can I run two APs in adhoc mode and roam between them? If so, are there any specific configurations I need have on the APs to allow it, and what are they?

Thanks,

Or can I run two APs in adhoc

Leo Laohoo — Mon, 09 May 2016 21:09:57 GMT

Or can I run two APs in adhoc mode and roam between them?

As long as there is enough signal OVERLAP between the two then it is possible.

Is any additional

Tim K — Mon, 09 May 2016 23:56:34 GMT

Is any additional configuration required for it? Would they have to be on the same channel?

Would they have to be on the

Leo Laohoo — Tue, 10 May 2016 00:31:26 GMT

Would they have to be on the same channel?

Most definitely not.

Refer link : http://www.cisco

mohanak — Tue, 10 May 2016 00:59:12 GMT

Refer link : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap12-wdsroam-rm.html#pgfId-1035854

https://learningnetwork.cisco.com/thread/23064