topic WlC Option 82 debug in Wireless

WlC Option 82 debug

Ahmed Ayaad — Mon, 05 Jul 2021 11:48:42 GMT

Dears,

we have WISM2 and configure it with option 82 on DHCP & Interfaces as shown on attached to send AP-SSID through dhcp.

I want to know which debug i will do on WLC to see option 82 on the dhcp request, as i tried (debug dhcp packet enable & debug dhcp message enable) but i didn't found option 82.

Thanks all

Hi,

Sandeep Choudhary — Mon, 21 Mar 2016 16:46:09 GMT

Hi,

Please check these to understand the core of DHCP option 82:

http://mrncciew.com/2013/05/18/understanding-dhcp-option-82/

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/113302-dhcp-option82-00.html

Regards

Dont forget to rate helpful posts

Information about DHCP option

mohanak — Mon, 28 Mar 2016 02:08:43 GMT

Information about DHCP option 82

Refer link : http://www.cisco.com/c/en/us/td/docs/ios/12_2sb/12_2sba/feature/guide/sbcpopt.pdf

Check this for option 82

Prakash Parvathala — Mon, 28 Mar 2016 14:55:11 GMT

Check this for option 82 debug

https://supportforums.cisco.com/document/120521/dhcp-option-82-service-provider-wi-fi