topic Hi , in Wireless

3850 WLC

Theodore April — Mon, 05 Jul 2021 11:10:46 GMT

Hi Guy’s,

I'm not a wireless guy so - this is new to me

I’ve got 2 switches:

Ground Floor

ZAOBSW01 - Wireless Lan Mobility controller

Installed 2 x1702 access point

Each access point broadcast 2 SSID's (TA_LAN & VC_Board_1)

2nd Floor

ZAOBSW02 - Wireless LAN Mobility Agent

Only 1 access point

Access point broadcast 2 SSID's (TA_LAN & VC_Board_2)

SSID -

TA_LAN - local LAN ssid (vlan 182)

VC_Board_1 - Video conference on the 1st floor (Vlan 50)

VC_Board_2 - Video conference on the 2nd floor (Vlan 50)

I need to roam on TA_LAN ssid between Access point and between floors with-out loosing connection

Floors are directly above one another & fibre connection between switches

Problem with DHCP on the 2nd floor switch:

I’m able to get an ip address on the ssid: - VC_Board_2 (Vlan 50)

I’m not able to get an ip address on TA_LAN (Vlan 182)

Troubleshooting:

When changing the client Vlan id from 182 to 50 on SSID TA_LAN – I get an ip address

Information -

I’ve read up that I need to do DHCP Snooping on the uplinks or the Global config + trusting

Still not working

Config’s attached

Rasika Nayanajith — Thu, 05 Nov 2015 01:54:30 GMT

Remove this interface from your SW02 & test it.

interface Vlan182
 ip address 10.187.182.2 255.255.255.0

HTH

Rasika

*** Pls rate all useful responses ***

Theodore April — Fri, 06 Nov 2015 13:27:02 GMT

Hi ,

ive removed the svi however in result I loose the switch gateway an capwap tunnel

regards

Theodore

Rasika Nayanajith — Fri, 06 Nov 2015 19:04:06 GMT

Really sorry, it was my mistake.

If you like I can offer some remote assistance to troubleshoot this. drop me a line to "mrncciew@gmail.com" with suitable time

Rasika