topic Re: ACU & Host Based EAP in Wireless

ACU & Host Based EAP

brennanm — Sun, 04 Jul 2021 15:56:10 GMT

I have been able to setup EAP-TLS with Windows XP using the Windows network settings. I would like to use the Aironet Client Utility to control my profiles as it offers more configurability and information.

I create a profile in the ACU with the SSID, Dynamic WEP, and select Host Based EAP from the Network Security Type drop-down menu. When I enable this profile, I lose all network connectivity. I have tried this with the 'Use Windows to configure my wireless network settings' checkbox both checked and unchecked and I have not removed any of the settings for this SSID from the Windows networking.

What am I missing? Thanks.

Re: ACU & Host Based EAP

derwin — Mon, 11 Aug 2003 14:04:35 GMT

Try following this the instructions on this link

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350cards/windows/incfg6/win5_ch6.htm#1170175

Re: ACU & Host Based EAP

aymerick.dumas — Thu, 04 Sep 2003 13:55:41 GMT

ANyone has tried EAP-TLS with W2K client and the Windows patch for 802.Xsupport ?

I cannot get authentication fine...

thanks