topic Refer the link : https:/ in Wireless

2594 WLC command disabled

KnowledgeAcquirer — Mon, 05 Jul 2021 10:13:01 GMT

When I issue the capwap ap hostname <name> command I get the error message ERROR!!! Command is disabled.

Why? I haven't changed default privilege levels.

Thank you.

The reason is because the ap

Scott Fella — Tue, 12 May 2015 00:31:08 GMT

The reason is because the ap has joined a WLC already. If you want to be able to use the command, you need to either delete the image from flash and just leave the rcv image or delete the private config from flash.

ERROR!!! Command is disabled

First, check the flash:
lap_1131#dir
Directory of flash:/

2 -rwx 279 May 09 2008 11:52:20 +00:00 env_vars
4 -rwx 6168 May 09 2008 11:52:20 +00:00 private-multiple-fs
6 drwx 256 May 09 2008 11:49:05 +00:00 c1130-k9w8-mx.124-3g.JA2
5 drwx 128 Mar 01 2002 00:03:43 +00:00 c1130-rcvk9w8-mx

15998976 bytes total (10716672 bytes free)

Then delete the LWAPP image:
lap_1131#delete /r /f flash:/c11310-k9w8-mx.124-3g.JA2

Not the one the has rcv in it!!!!!!

Thirdly reload the AP:
lap_1131#reload

Then issue a clear lwapp private-config

You'll end up with a clear AP.

*****************************************************************

Option 2 - If there in no rcv image

delete /r /f flash:private-multiple-fs

-Scott

Could be due to Cisco Bug ID:

Leo Laohoo — Tue, 12 May 2015 00:55:25 GMT

Could be due to Cisco Bug ID: CSCtl96208

Workaround listed is to configure the hostname via the WLC.

Refer the link : https:/

mohanak — Tue, 12 May 2015 11:05:58 GMT

Refer the link : https://supportforums.cisco.com/discussion/11794456/error-command-disabled-once-again

Thank you!

KnowledgeAcquirer — Tue, 12 May 2015 22:42:11 GMT

Thank you!

Please refer to the below

sobhardw — Wed, 13 May 2015 23:17:21 GMT

Please refer to the below link :

https://supportforums.cisco.com/document/71531/how-assign-static-ip-lightweight-access-point-lap-1131ag-registering-controller-wlc