topic Please refer to the below in Wireless

WLC High Availability

Alfredo Bosca Bataller — Mon, 05 Jul 2021 10:12:47 GMT

I need to failover so we will move all ap's from WLC1 to WLC2. My issue is that exist 2 HA config:

- Global: Wireless> Global Configuration

-Local: Wireless > All APs

What have more priority the local or global?

Thanks,

Hi Alfredo,Local AP HA tab

Sandeep Choudhary — Tue, 12 May 2015 06:16:25 GMT

Hi Alfredo,

Local AP HA tab has the first priority.

All APs > Details for AP01 and then HA tab.

Regards

Don't forget to rate helpful posts

Please refer to the below

sobhardw — Wed, 13 May 2015 22:29:30 GMT

Please refer to the below link for the information on Wireless LAN Controller Fail over Priority :

https://supportforums.cisco.com/document/17171/how-configure-wlan-controller-failover-lightweight-access-points

Please let me know If the solution is helpful

I know that the local config

Alfredo Bosca Bataller — Thu, 14 May 2015 15:50:51 GMT

I know that the local config has override. But how could I do that global config has more priority without outage?

Hello Alfredo,Please check

Prakash Parvathala — Mon, 06 Jul 2015 15:38:06 GMT

Hello Alfredo,

Please check the below links

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110101.html

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/69639-wlc-failover.html