topic Cisco WLC 2504 sofware update in Wireless

Cisco WLC 2504 sofware update

umar bhatti — Mon, 05 Jul 2021 09:38:35 GMT

Dear Friends,

I am using Cisco WLC 2504 current software version is 7.0.220.0 and I want to upgrade it to the latest version which is 8.x.x.x.

Could you please help and advice the best way of doing it? Also can I upgrade direct to the latest version or do I have to upgrade step by step?

Thank you very much for your help and support.

Thanks

Umar

Hi

Rasika Nayanajith — Tue, 03 Mar 2015 19:40:19 GMT

Could you please help and advice the best way of doing it? Also can I upgrade direct to the latest version or do I have to upgrade step by step?

Yes, you can go directly to 8.0.x from 7.0.x code. Refer below link

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80mr1.html#68333

Make sure you refer the release notes for any known issues with this code. Also upgrade FUS to 1.9.0.0 as well. This will take around 30 min downtime as well.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html

If you have different AP models, MSE, Prime products, refer this compatibility matrix as reference.

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

HTH

Rasika

**** Pls rate all useful responses ****

Hi Rsika, Thank you very much

umar bhatti — Wed, 04 Mar 2015 09:05:17 GMT

Hi Rsika,

Thank you very much for your reply. I’ll go through the documents and let you know if I need further help probably I do :).

Thanks

Umar

Hi Rasika, I have followed

umar bhatti — Thu, 05 Mar 2015 11:22:43 GMT

Hi Rasika,

I have followed your instructions and successfully upgraded the software and FUS.

Thank you very much for your help.

Kind Regards
Umar

Good to hear that & glad I

Rasika Nayanajith — Thu, 05 Mar 2015 19:00:46 GMT

Good to hear that & glad I was able to help you..

Rasika