topic The only other way is to in Wireless

WLC

mukeshcu1 — Mon, 05 Jul 2021 08:35:51 GMT

Hi,

We are using Cisco WLC. I want to give delegation of WLC, Like adding mac address,user creation etc to my L1 team.. Is there any way for achieving this..

Thanks in advance..

The only other way is to

Scott Fella — Sat, 27 Sep 2014 02:26:02 GMT

The only other way is to create a lobby ambassador account, but you need to know what they can do and can't.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70users.html#wp1048412

You can also use radius or tacacs if you have it to limit what tabs on the GUI a user can have access to.

https://supportforums.cisco.com/document/57301/wlc-and-acs-5x-tacacs-configuration-example-web-authentication

Scott

Hello Scott,Thanks for revert

mukeshcu1 — Sat, 27 Sep 2014 18:22:38 GMT

Hello Scott,

Thanks for revert.

I have gone through the link which you provided but its not mentioned anywhere, How to limit the GUI interface tab..

I have created the lobby ambassador account and i can only get the option for adding / deleting guest account..Please help how can i assign other privileges like mac filtering, health monitoring etc.

You can use roles if using

Scott Fella — Sun, 28 Sep 2014 04:05:18 GMT

You can use roles if using TACACS:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/config_guide/b_cg75/b_cg75_chapter_0101001.html

You can't specify what they can and can't do though. You limit what tabs on the GUI they can access.

Scott

Thanks Scott.

mukeshcu1 — Sun, 28 Sep 2014 18:24:10 GMT

Thanks Scott.

You may select the following

Abha Jha — Tue, 30 Sep 2014 21:49:33 GMT

You may select the following roles using TACACS :-

MONITOR, WLAN, CONTROLLER, WIRELESS, SECURITY, MANAGEMENT, COMMANDS, ALL, and LOBBY. The first seven correspond to the menu options on the controller GUI and allow access to those particular controller features. If a user is not entitled for a particular task, the user is still allowed to access that task in read-only mode. You can enter one or multiple roles, depending on the group's needs. Use ALL to specify all seven roles or LOBBY to specify the lobby ambassador role.