topic Hi Florin,I dont think you in Wireless

WLC Admin HTTP Sessions & Logging

Florin Barhala — Mon, 05 Jul 2021 07:29:14 GMT

Hello,

Is there a way to see existing HTTP users logged on the WLC? I am interested both in a GUI and a CLI method.

Secondly, how can I filter logging in a way similar to ASA class_messages:

logging list LOGIN level errors class vpn

logging list LOGIN message 605004

logging list LOGIN message 605005

Thirdly, is there a way to see a specific part of the WLC configuration; e.g. to see the interface config.

Many thanks!

Sandeep Choudhary — Thu, 20 Mar 2014 14:45:31 GMT

Hi Florin,

I dont think you can check about HTTP session but if anyone have CLI access then you can know by this command:

CLI:

(WLC) >show loginsession

GUI:

Management > User Session

You can filter the logging by severity level:

Check this:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/6-0/configuration/guide/Controller60CG/c60err.html

Regards

Dont forget to rate helpful posts