topic WLC HA Warning Message in Wireless

WLC HA Warning Message

mgallagher44 — Mon, 05 Jul 2021 07:12:59 GMT

Where exactly is the license warning message seen when a secondary controller is active for over 90 days? I've seen a CLI example but is it seen elsewhere such as the web GUI or through SNMP traps? Could the user (Wi-Fi station) experience this message too if using something like webauth? I'm certifying this feature and want to provide proper expectations for operations but don't have the luxery of 91 days to trigger it.

Re: WLC HA Warning Message

Scott Fella — Tue, 18 Feb 2014 15:48:44 GMT

You will see this message only in the logs of the WLC. Users will not see this message at all. It's more af a NAG message to the admin of the WLC, since this message will show up in the log.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

Re: WLC HA Warning Message

mgallagher44 — Tue, 18 Feb 2014 16:44:58 GMT

Thanks Scott. Do you know if it's visible to the admin from the web GUI?

Re: WLC HA Warning Message

Scott Fella — Tue, 18 Feb 2014 17:00:48 GMT

I don't believe it is from the GUI... only the CLI. You might see it on the logs. On an HA N+1, when you log into the HA secondary, it will have a popup telling you about the license, but not in AP SSO I don't think.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

Re: WLC HA Warning Message

mgallagher44 — Tue, 18 Feb 2014 17:29:53 GMT

Ok, I'm only doing AP SSO

WLC HA Warning Message

Scott Fella — Tue, 18 Feb 2014 20:08:53 GMT

Yeah, so you will only see this from the console or CLI.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****