topic AP 1252 radio 802.11a is not supported on WLC 4402 in Wireless

AP 1252 radio 802.11a is not supported on WLC 4402

rezende.c — Sun, 04 Jul 2021 08:16:07 GMT

Hi All,

I running a WLC with 4.2.0.5 software and AIR-LAP1252AG-T-K9 access points.

After register in WLC the 802.11a radio not working and is showing as "not supported".

What can be happing? My WLC is configured to use "US" contry code.

help please,

Claudio Rezende

AP 1252 radio 802.11a is not supported on WLC 4402

Rasika Nayanajith — Thu, 14 Nov 2013 19:57:36 GMT

Your WLC is in regulatory domain North Amerca (-A), but your AP suppose to be in South America or APAC (-T for Brazil or Thaiwan).

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps6087_Products_Data_Sheet.html

If it is on same regulatory domain, you can configur multiple countries on your WLC (in case you have AP in different countries within same region).

Also 1252 to work you should have min 4.2.61.0 sotware version of your WLC (refer table 5 )

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

HTH

Rasika

**** Pls rate all useful responses****

AP 1252 radio 802.11a is not supported on WLC 4402

rezende.c — Mon, 18 Nov 2013 23:42:45 GMT

Ok about regulatory domain. I will check this.

About second link, I'm using WLC 4402 with 4.2.205.0 software, not WLC 5500.

Regards,

Claudio

AP 1252 radio 802.11a is not supported on WLC 4402

Rasika Nayanajith — Mon, 18 Nov 2013 23:56:50 GMT

Ok, then your software is supported this AP model.Given link is not specific to particular WLC hardware(5508) & it is applicable to all WLC/AP in general.

As long as you get compatible regulatory domain AP, things should work.

HTH

Rasika

**** Pls rate all useful responses ****