https://community.cisco.com/t5/wireless/lightweight-ap-access-cli-using-aaa-authentication/m-p/3767047#M11815 <P>Hi</P> <P>&nbsp; This is not possible as per the threads I´ve seing here.&nbsp; But, If you can give it a try, you could and an AP as a client on the AAA server and then try to reach the AP using the AAA credentials.&nbsp; Considering that when Global Credential is in place, the WLC username and password is send to the AP as well, this can be true to AAA.&nbsp;</P> <P>&nbsp;</P> <P>-If I helped you somehow, please, rate it as useful.-</P> Thu, 20 Dec 2018 02:10:56 GMT Flavio Miranda 2018-12-20T02:10:56Z https://community.cisco.com/t5/wireless/lightweight-ap-access-cli-using-aaa-authentication/m-p/3766946#M11814 <P><SPAN>I need to authenticate a user logging into (telnet/ssh) a lightweight AP using RADIUS or TACACS+.&nbsp; I know you can set global usernames and passwords, but I would like to use ACS to authenticate user access to log into their APs.</SPAN></P> Mon, 05 Jul 2021 16:36:59 GMT https://community.cisco.com/t5/wireless/lightweight-ap-access-cli-using-aaa-authentication/m-p/3766946#M11814 Gabriel 2021-07-05T16:36:59Z https://community.cisco.com/t5/wireless/lightweight-ap-access-cli-using-aaa-authentication/m-p/3767047#M11815 <P>Hi</P> <P>&nbsp; This is not possible as per the threads I´ve seing here.&nbsp; But, If you can give it a try, you could and an AP as a client on the AAA server and then try to reach the AP using the AAA credentials.&nbsp; Considering that when Global Credential is in place, the WLC username and password is send to the AP as well, this can be true to AAA.&nbsp;</P> <P>&nbsp;</P> <P>-If I helped you somehow, please, rate it as useful.-</P> Thu, 20 Dec 2018 02:10:56 GMT https://community.cisco.com/t5/wireless/lightweight-ap-access-cli-using-aaa-authentication/m-p/3767047#M11815 Flavio Miranda 2018-12-20T02:10:56Z