Cisco 1552 Wireless Access Point Bandwidth

keith.kelley@honeywell.com — Mon, 05 Jul 2021 16:26:45 GMT

What are the respective bandwidths for the 1552 5Ghz and 2.4Ghz frequencies?

Re: Cisco 1552 Wireless Access Point Bandwidth

Rasika Nayanajith — Wed, 14 Nov 2018 01:51:52 GMT

Pls refer below datasheet.

https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1550-series/data_sheet_c78-641373.html

It can support PHY data rates upto 300Mbps (that is not application throughput you will get, it is much less than that ~ 40-60%. When you get multiple clients on AP, each individual clients shared that available bandwidth of the AP, so individual clients won't get much higher throughput)

Capabilities

● 2x3 multiple-input multiple-output (MIMO) with two spatial streams

● Legacy beamforming

● 20- and 40-MHz channels

● PHY data rates up to 300 Mbps

● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

● 802.11 dynamic frequency selection (DFS)

● Cyclic shift diversity (CSD) support

Data Rates Supported	802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
	802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
	802.11n data rates (2.4 GHz and 5 GHz):
	MCS Index^[1]	GI^[2]= 800 ns		GI = 400 ns
		20-MHz Rate (Mbps)	40-MHz Rate (Mbps)	20-MHz Rate (Mbps)	40-MHz Rate (Mbps)
	0	6.5	13.5	7.2	15
	1	13	27	14.4	30
	2	19.5	40.5	21.7	45
	3	26	54	28.9	60
	4	39	81	43.3	90
	5	52	108	57.8	120
	6	58.5	121.5	65	135
	7	65	135	72.2	150
	8	13	27	14.4	30
	9	26	54	28.9	60
	10	39	81	43.3	90
	11	52	108	57.8	120
	12	78	162	86.7	180
	13	104	216	115.6	240
	14	117	243	130	270
	15	130	270	144.4	300

HTH

Rasika

*** Pls rate all useful responses ***

topic Cisco 1552 Wireless Access Point Bandwidth in Wireless

Cisco 1552 Wireless Access Point Bandwidth

Re: Cisco 1552 Wireless Access Point Bandwidth