topic WLC Guest WEB Authentification in Wireless

WLC Guest WEB Authentification

a-weitzel — Sun, 04 Jul 2021 07:34:23 GMT

Hello,

I would like to configure on a WLC 2504 Internet-Access for Guests through a web authentication.

But I always find configuration instructions only describe the with the additional anchor WLC?

This works but also without anchor WLC, right?

Can anyone give a hint on where I find a manual for it (ideal for Release 7.4 or 7.5) to me.

Thank you

Alexander

Re: WLC Guest WEB Authentification

Stephen Rodriguez — Fri, 02 Aug 2013 13:16:22 GMT

Yes it will work.

You just need to define the L3 security as webauth in the WLAN.

Steve

Sent from Cisco Technical Support iPhone App

WLC Guest WEB Authentification

Erwin Salazar — Fri, 02 Aug 2013 16:37:28 GMT

Should be fairly straight forward in the configuration guide below:

http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/consolidated/b_cg74_CONSOLIDATED_chapter_01010100.html#ID1389

Anchors are only typically needed in a DMZ environment if you want to segregate your guest traffic from your internal network.

WLC Guest WEB Authentification

George Stefanick — Fri, 02 Aug 2013 16:51:54 GMT

It does indeed. When I use the foreign controller for guest access, I often will use a 5508 in port mode (non lag) and break out a port for guest.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."