topic Re: wlc error in Wireless

wlc error

suthomas1 — Sun, 04 Jul 2021 07:20:27 GMT

Hi,

I am configuring a wlc 5508. I get following error ,

Management Interface IP Address: 10.10.10.1

Management Interface Netmask: 255.255.0.0

Management Interface Default Router: 10.10.10.254

Error in setting management interface IP

I tried using different IP's also, but its still the same.

Appreciate all assistance to get it correct. Thank You!

Re: wlc error

George Stefanick — Wed, 03 Jul 2013 12:46:41 GMT

If you change the subnet mask to 255.255.255.0 does it work ?

Sent from Cisco Technical Support iPad App

wlc error

suthomas1 — Wed, 03 Jul 2013 12:50:41 GMT

no i tried this as well. it doesn't help.

Re: wlc error

George Stefanick — Wed, 03 Jul 2013 12:52:06 GMT

Is one of the other dynamic interfaces in this same range ?

Sent from Cisco Technical Support iPad App

wlc error

suthomas1 — Wed, 03 Jul 2013 12:56:06 GMT

I am unable to check this. Because this WLC is now used for reconfiguring for another network.

The moment i boot it and login via console, it says " AUTO-INSTALL termination; no configuration loaded" ,

something of this sort.

upon entering it prompts me for username, password etc and then comes to the management interface address which is were i get this error.

I have tried with different address ranges.

Should we reset this to factory default?

wlc error

George Stefanick — Wed, 03 Jul 2013 13:03:40 GMT

I beleive it has an overlapping dynamic interface. Either reset it or again check the dynamic interfaces.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

wlc error

suthomas1 — Wed, 03 Jul 2013 13:12:37 GMT

how do i reset this ?

each time i reboot the system it comes to the prompt where it asks to enter username , password and other ip address information.

wlc error

Scott Fella — Wed, 03 Jul 2013 14:21:27 GMT

Boot the WLC and then when you see the output saying hit , press ESC. The menu will appear in which you can factory reset the WLC.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

wlc error

suthomas1 — Wed, 03 Jul 2013 16:31:40 GMT

I just got a thought on this to my mind, during the configuration i selected NO option for enabling LAG.

Does this by any chance hinder setting of the management interface ip address.

wlc error

George Stefanick — Wed, 03 Jul 2013 16:37:39 GMT

No .. It shouldnt ..

Re: wlc error

Scott Fella — Wed, 03 Jul 2013 16:50:48 GMT

As long as you don't have more than one port connected.

Sent from Cisco Technical Support iPhone App

wlc error

suthomas1 — Wed, 03 Jul 2013 17:09:17 GMT

no port connections have been done physically from WLC to network switch so far.

I was just trying to configure the thing first.

wlc error

Ravi Singh — Thu, 04 Jul 2013 02:49:06 GMT

It's happen due to overlapping interface IP. Please cross verify the setting or reset the WLC and then try.