WLC 2112 with 1042 Mesh APs

benhamzagi — Sun, 04 Jul 2021 07:05:28 GMT

Hello everybody,

I have a Mesh architecture with 2112 WLC and 1042 APs

I want just to know if I can connect one 1310 AP to the ethernet port of a mesh 1042 AP with ethernet bridging enabled.

thanks

Re: WLC 2112 with 1042 Mesh APs

Scott Fella — Fri, 17 May 2013 19:50:13 GMT

I would think if your 1310 was in autonomous mode you would be able to. It would be like connecting a switch to the Ethernet of a MAP.

Sent from Cisco Technical Support iPhone App

WLC 2112 with 1042 Mesh APs

manbaez — Fri, 17 May 2013 20:01:34 GMT

Hello benhamzagi,

Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number 80931

Case Description:

WLC 2112 with 1042 Mesh APs

Case Solution:
Here is the compatibility Matrix link

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp118661

Or the attach tables will help you base on Release, Controller, Mesh and AP

Table 3 Controller Software Release and Controller Model Support Matrix
Controller Model	First Support	Last Support
*2100*	*4.2.x*	*7.0.x*
2500	7.0.x	-
Cat3850	3.2.0SE	-
4400	4.2.x	7.0.x
5500	6.0.x	-
5700	3.2.0SE	-
7500	7.0.x	-
8500	7.3.x	-
Virtual Controller	7.3.x	-
WiSM	4.2.x	7.0.x
WiSM2 (1 DP)	7.0.x	-
WiSM2 (2 DP)	7.2.x	-
SRE	7.0.x	-

Table 4 Mesh and Controller Software Releases and the Supported APs
Mesh and Controller Releases	Supported Access Points
7.4.x	1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1130, 1240, 1250, 1260, 1600, 2600, 3500e, 3500i, 3500p, 3600e, 3600i, 1140, 600 OEAP, AP801, AP802
7.3.x	1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1130, 1240, 1250, 1260, 2600, 3500e, 3500i, 3600e, 3600i, 3500p, 1140, 600 OEAP, AP801, AP802
7.2.11x.x	1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552S, 1130, 1240, 1250, 1260, 2600, 3500e, 3500i, 3500p, 3600e, 3600i, 1140, 600 OEAP, AP801, AP802
7.2.10x.x	1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552S, 1130, 1240, 1250, 1260, 3500e, 3500i, 3600e, 3500p, 3600i, 1140, 600 OEAP, AP801, AP802
7.0.2x.x	1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1130, 1240, 1250, 1260, 3500e, 3500i, 3500p, 1140, 600 OEAP, AP801, AP802
7.0.116.0	1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1130, 1240, 1250, 1260, 3500e, 3500i, 3500p, 1140, 600 OEAP, AP801, AP802
7.0.98.x	1522, 1524PS, 1524SB, 1130, 1240
6.0.202.0	1522, 1524PS, 1524SB, 1130, 1240
5.2.193.0	1522, 1524PS, 1130, 1240
4.1.192.35M (Mesh Release 3)	1505, 1510, 1522, 1524PS, 1130, 1240
4.1.191.24M (Mesh Release 2)	1505, 1510, 1522 (US, Canada, and RoW), 1130, 1240
4.1.190.5 (Mesh Release 1)	1505, 1510, 1522 (US and Canada)

As per your confirmation, I am going to close the case for this specific inquiry. We strive to provide you with excellent service. Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We value your input and look forward to serving you moving forward.

WLC 2112 with 1042 Mesh APs

benhamzagi — Sat, 18 May 2013 06:29:22 GMT

I'm not asking about the compatibility, I want to know if the lightwight 1310 AP can operate normally behind an ethernet port of 1042 mesh AP

Re: WLC 2112 with 1042 Mesh APs

Scott Fella — Sat, 18 May 2013 13:19:20 GMT

If its lightweight it will not work. Autonomous should.

Sent from Cisco Technical Support iPhone App

topic WLC 2112 with 1042 Mesh APs in Wireless

WLC 2112 with 1042 Mesh APs

Re: WLC 2112 with 1042 Mesh APs

WLC 2112 with 1042 Mesh APs

WLC 2112 with 1042 Mesh APs

WLC 2112 with 1042 Mesh APs

Re: WLC 2112 with 1042 Mesh APs