topic Watching debug via ssh session to the WLC in Wireless

Watching debug via ssh session to the WLC

Mohit Chauhan — Sun, 04 Jul 2021 06:27:42 GMT

Hi,

I am quite new to wireless side and had a small Q regarding watching debug output while i am ssh to the WLC? I tried the other day and did not see any messages, now this could be for the reason that nothing triggered or perhaps it needs something like terminal monitor?? i couldnt find any such command.

my WLC is 5508 running 7.3 version.

Thnks in advance!

Regards,

Mohit

Re: Watching debug via ssh session to the WLC

Scott Fella — Fri, 01 Feb 2013 13:04:04 GMT

You don't need terminal monitor. When you run a specific, unless the event is triggered, you will not see anything.

Try a debug client the disconnect that device from the wireless and connect it back to the wireless.

Sent from Cisco Technical Support iPhone App

Re: Watching debug via ssh session to the WLC

Scott Fella — Fri, 01 Feb 2013 13:07:01 GMT

Wlc debug

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080b3e118.shtml#control

Client debug

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080b3e118.shtml#client_debug

Sent from Cisco Technical Support iPhone App