topic Enable mode on 2112 WLC in Wireless

Enable mode on 2112 WLC

mahesh18 — Sun, 04 Jul 2021 06:00:57 GMT

Hi,

Do we have enable mod eon 2112 WLC ?

Also if we need to access WAP from WLC how can we telnet or ssh?

Thanks

MAhesh

Enable mode on 2112 WLC

Saravanan Lakshmanan — Fri, 09 Nov 2012 22:27:03 GMT

Do we have enable mod eon 2112 WLC ?

No.

Also if we need to access WAP from WLC how can we telnet or ssh?

First you need to join the AP to WLC, WLC>>wireless>>AP click on the AP and select Advanced tab, there you can see telnet, ssh check box.

Enable mode on 2112 WLC

Amjad Abdullah — Sun, 11 Nov 2012 06:07:47 GMT

There is no enable/config modes in WLC because it does not run IOS.

You need to enable either SSH or telnet (or both) on the AP from the controller settings (Saravanan metnioned the exact location where to do that in his previous reply. Thanks Saravanan). After enabling that you can telnet or ssh as you want from whatever terminal that can reach the AP on the network. (default username and password for telnet/ssh is Cisco/Cisco. You can change that from the AP settings as well on the WLC).

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

Enable mode on 2112 WLC

mahesh18 — Wed, 14 Nov 2012 19:12:36 GMT

Hi Saravanan and Amjad,

Many thanks for your replies.

sorry for late rating of post.

Regards

Mahesh

Enable mode on 2112 WLC

manjeets — Sun, 21 Apr 2013 09:38:13 GMT

Do we have enable mod eon 2112 WLC ?

No.

Enable mode on 2112 WLC

Saravanan Lakshmanan — Sun, 21 Apr 2013 18:00:33 GMT

Hello Mahesh

Thanks for Rating.

Thanks

Saravanan