topic WLC controller license checkup in Wireless

WLC controller license checkup

birukgetachew — Sun, 04 Jul 2021 05:34:36 GMT

Hello guys,

I recently bought a Cisco 5508 WLC with SWC5500LPE-K9-70 and a Cisco 1262 AP with AIR-OPT60-DHCP vender class identifier .How can I check wether the SWC5500LPE-K9-70 is included on the 5508 wlc and AIR-OPT60-DHCP on the 1262 ap?

WLC controller license checkup

Scott Fella — Sat, 25 Aug 2012 15:37:22 GMT

Option 60 is what you configure on the dhcp and it really isn't required. That part# you have is without the DTLS license.... is that what you want.

If a customer chooses SWC5500K9-60, SWC5500K9-70 or SWC5500K9-72, DTLS Data Encryption is enabled by default. When a customer orders the 5500 and chooses either SWC5500LPE-K9-70 or SWC5500LPE-K9-72 in the Optional Licenses TAB, data DTLS Encryption is disabled.

WLC controller license checkup

birukgetachew — Sat, 25 Aug 2012 16:05:50 GMT

Thanks Scott,

My client wants to see if SWC5500LPE-K9-70 license is included or not on the controller.

WLC controller license checkup

Scott Fella — Sat, 25 Aug 2012 16:09:33 GMT

Look at table 5 for the license part #

http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html

WLC controller license checkup

birukgetachew — Sat, 25 Aug 2012 16:35:39 GMT

hi scott

the part no. is L-LIC-CT5508-50A but my question is how can i show the clinet from the controller this licence is included on the device or not? is there any show command to use from the controller CLI?

Re: WLC controller license checkup

Scott Fella — Sat, 25 Aug 2012 18:19:38 GMT

You can do a show license all or on the GUI main page shows the number of APs supported.

Sent from Cisco Technical Support iPhone App