topic Re: WLC Web auth with only accept button in Wireless

WLC Web auth with only accept button

CCCAdmins — Sun, 04 Jul 2021 04:31:56 GMT

Hi, please help! I am trying to configure a customised login.html page for guest wireless acess but I do not want users to enter a username and password, I just want the terms and conditions displayed and then they must click an "Accept" button to continue and be authorised. I am able to create the webauth bundle and do the tftp transfer to the controller (5508) but how do I remove the username and password fields and just have the accept button?

Thanks

WLC Web auth with only accept button

Matt Ankney — Wed, 08 Feb 2012 16:36:17 GMT

Can you please verify that you have checked 'Passthrough' instead of 'Authentication' under the Web Policy security?

WLC Web auth with only accept button

CCCAdmins — Thu, 09 Feb 2012 08:45:22 GMT

Hi, yes I have applied the Web-passthrough security policy. If I use the internal default web login page then it displays my messgae and just has the acceopt button and this works fine but when I change and apply to use the customised login page via the web bundle I loose the accept button.

Thanks

Re: WLC Web auth with only accept button

Scott Fella — Thu, 09 Feb 2012 12:43:26 GMT

You uploaded the wrong .tar file. When you download the webauth bundle, extract the files and there is a readme file. Find the file you want, customize it if you know how and upload that back to the wlc. Depending on your wlc and code, if the custom webauth bundle doesn't show, change the setting to use internal webauth and hit apply then change it back to custom webauth.

Sent from Cisco Technical Support iPhone App

Re: WLC Web auth with only accept button

CCCAdmins — Thu, 09 Feb 2012 12:58:39 GMT

Thanks for the reply.

I have not downloaded the webauth bundle from the Cisco website, I have created my own html document, based on the html source code I see when using the internal default webauth login page and I have zipped this into a .tar file that includes our logo and my customised login.html document then uploaded to the controller. Is this where I am going wrong? Do I need to use the templates within the webauth bundlefrom the Cisco site?

Thanks for your help!

Re: WLC Web auth with only accept button

Scott Fella — Thu, 09 Feb 2012 13:02:59 GMT

Unless you know how to customize the HTML, you might just want to download that bundle, pick a file that you like and use that. You can edit that if you want also.

Thanks,

Scott Fella

Sent from my iPhone