WLC and Wireless VLAN's

Saman Shamim — Sun, 04 Jul 2021 04:00:19 GMT

Hi guys,

1. A Cisco WLC is connected to a Switch. 2 LWAPs (AP1 and AP2) are connected to that Switch. 2 SSID's (SSID 1 and SSID 2) are defined on the WLC. SSID 1 is tied to VLAN 1 and SSID 2 is tied to VLAN 2. Here is my question:

How would you manage the WLC to send only SSID 1 to AP1 so every client that connects to AP1 becomes a member of VLAN 1?

In my real world project, each building will have a switch with tons of APs connected to. I want all the users at buliding A to be in VLAN 1 (ONE subnet) and that's it.

WLC and Wireless VLAN's

George Stefanick — Fri, 28 Oct 2011 21:15:55 GMT

Hi Saman,

You can accomplish this with AP groups. I created a video how to do this with older code. The config process has changed a bit, but the AP group concept is the same:

http://www.my80211.com/cisco-wlc-labs/2009/3/22/cisco-ap-group-nugget.html

To configure AP groups with code 5.2 and above consulate the config guide.

If you find this helpful please support the rating system! THANKS!

topic WLC and Wireless VLAN's in Wireless

WLC and Wireless VLAN's

WLC and Wireless VLAN's