topic two WLC. in Wireless https://community.cisco.com/t5/wireless/two-wlc/m-p/1763804#M122089 <P>Hi This is my problem.</P><P></P><P>I have two WLC, and I have a local netusers in one of the two WLC, and I want pass those usernames to the other controller, but i cant see the passwords of the netusers.</P><P></P><P>Regards.</P> Sun, 04 Jul 2021 03:57:32 GMT jmanzur1683 2021-07-04T03:57:32Z two WLC. https://community.cisco.com/t5/wireless/two-wlc/m-p/1763804#M122089 <P>Hi This is my problem.</P><P></P><P>I have two WLC, and I have a local netusers in one of the two WLC, and I want pass those usernames to the other controller, but i cant see the passwords of the netusers.</P><P></P><P>Regards.</P> Sun, 04 Jul 2021 03:57:32 GMT https://community.cisco.com/t5/wireless/two-wlc/m-p/1763804#M122089 jmanzur1683 2021-07-04T03:57:32Z two WLC. https://community.cisco.com/t5/wireless/two-wlc/m-p/1763805#M122090 <HTML><HEAD></HEAD><BODY><P>I could to use a mobility group for this?</P></BODY></HTML> Thu, 20 Oct 2011 03:29:39 GMT https://community.cisco.com/t5/wireless/two-wlc/m-p/1763805#M122090 jmanzur1683 2011-10-20T03:29:39Z Re: two WLC. https://community.cisco.com/t5/wireless/two-wlc/m-p/1763806#M122091 <HTML><HEAD></HEAD><BODY><P>Jorge,</P><P> The WLC do not synch their databases. If you need that account in both WLC, you'll need to find out the password and out it in manually. You may want to look into purchasing WCS/NCS to be able to push templates to both WLC.</P><P></P><P>Now, you may be able to pull the password by issuing the command config password clear-text enable, and then doing a show run-config</P><P></P><P>HTH,</P><P>Steve</P><P></P><P>Sent from Cisco Technical Support iPad App</P></BODY></HTML> Thu, 20 Oct 2011 12:33:18 GMT https://community.cisco.com/t5/wireless/two-wlc/m-p/1763806#M122091 Stephen Rodriguez 2011-10-20T12:33:18Z