topic WLC 4402 ver 6.0 url redirect in Wireless

WLC 4402 ver 6.0 url redirect

Arthur Rack — Sun, 04 Jul 2021 03:52:23 GMT

Hi, another question, I dont understand smth.

I have 2 vlans.

VLAN/WLAN 10 wep key

VLAN/WLAN 20 radius

VLAN/WLAN 20 work properly.

VLAN/WLAN 10 also but here to access a network user needs to know a WEP key, and then he can access local network ( no Internet access), to access he must LOG IN. I have a web url for authentication, the address is: 10.10.15.12 (it is not on the controller). What I want to achive is: when user is switching on a IE browser or FF the first apperead window should be a authentication page. The problem now is that it takes a long time to redirect to auth page and I want to fix it.

In manual I can read about "Web Authentication" but I cant see the window where is the field to enter an http address...

thanks for any advice

WLC 4402 ver 6.0 url redirect

Ven Taylor — Wed, 05 Oct 2011 13:55:13 GMT

We've seen this too. It turned out to be a bug in our code that caused slow redirect or redirect timeouts.

Unfortunately, the fix didn't work and code upgrades didn't work either.

We got frustrated with it and ended up moving away from web auth and going with PEAP TLS and integrating it with ACS for radius via LDAP to Active Directory.

I'm sure that's not what you wanted to hear, but I'm only speaking from my experience with web auth.

Ven

WLC 4402 ver 6.0 url redirect

Kayle Miller — Wed, 05 Oct 2011 16:06:19 GMT

Arthur,

I am not sure if I am understanding your correctly or not, but if your trying to fingure out where to configure the WebAuth page on a Cisco controller, you need to goto Security> WebAuth on the controller and you should see an option for the WebAuth, from there you can set it to an external address.

HTH