topic Re: have one cisco wireless controller CISCO2106 in Wireless

have one cisco wireless controller CISCO2106 . i have configured mangement interface and AP-manager interface into that. I can now login to WLC through management interface, But the problem is AP-manager interface is not coming UP so the AP are not assoc

sumeet kumar — Sun, 04 Jul 2021 03:03:13 GMT

Re: have one cisco wireless controller CISCO2106

dmantill — Thu, 07 Apr 2011 14:18:20 GMT

What do you mean it is not UP? Can you please upload config and debugging? What output do you see on the AP side using the console port?

What is the discovery method?

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Mon, 11 Apr 2011 07:27:35 GMT

Hi Thanks for reply,

Pls find the attached config and debug

i can able to ping management interface but can not ping Ap-manger interface.

Pls help ...

Re: have one cisco wireless controller CISCO2106

Surendra BG — Mon, 11 Apr 2011 07:33:08 GMT

Hi Sumeeth,

Thanks for uploading the info!!

The AP manager interface is the NON-PINGABLE interface.. what ur able to see is the expected behaviour.. the AP manager IP should not be pinged..

However, from the config i saw ur management and the AP manager are assigned to dofferent ports.. please issue the command and lemme know if that resolves the issue..

interface port ap-manager 1

Please lemme know if this answered ur question and mark it as answered if so!!

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

Surendra BG — Mon, 11 Apr 2011 07:34:44 GMT

Hi Sumeeth,

Thanks for uploading the info!!

The AP manager interface is the NON-PINGABLE interface.. what ur able to see is the expected behaviour.. the AP manager IP should not be pinged..

However, from the config i saw ur management and the AP manager are assigned to dofferent ports.. please issue the command and lemme know if that resolves the issue..

config interface port ap-manager 1

Please lemme know if this answered ur question and mark it as answered if so!!

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Mon, 11 Apr 2011 07:38:26 GMT

Hi Surendra,

Thanks but in this model WLC if you assign same interface port for both the mac address will be same for both interface thats waht i made AP manager interface on port 2 even though if i make both on port 1 AP not associating with WLC

Re: have one cisco wireless controller CISCO2106

Surendra BG — Mon, 11 Apr 2011 07:40:37 GMT

Is the LAG enabled on the WLC??

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Mon, 11 Apr 2011 07:42:24 GMT

No there is no option to enable the LAG in this model

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Mon, 11 Apr 2011 07:44:11 GMT

You can chat with me in gmail ID sumeetf

uture@gmail.com

Re: have one cisco wireless controller CISCO2106

Surendra BG — Mon, 11 Apr 2011 07:45:07 GMT

Ok.. please map the AP manager to port 1 and then reboot the WLC.. in the mean time cature the console logs from the AP.. to see the reason why the AP is not able to get registered..

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

Surendra BG — Mon, 11 Apr 2011 07:47:59 GMT

No problem!! i am active here

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

Surendra BG — Mon, 11 Apr 2011 08:18:34 GMT

any update??

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Mon, 11 Apr 2011 09:00:39 GMT

Pls find the report after changing the AP-manager port. This device is on remote location, So no console is connected...

Re: have one cisco wireless controller CISCO2106

Surendra BG — Mon, 11 Apr 2011 09:06:08 GMT

Please go through the below links and proced further.. U get more info on the same!!

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

Lemme know if this helps

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

dmantill — Mon, 11 Apr 2011 15:00:05 GMT

Could you please reply back wiht SHOW RUN-CONFIG and not the RUNNING-config..?

Let us know if the APs are getting registered.

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Thu, 14 Apr 2011 10:57:32 GMT

Hi ,

Again i have the same problem after rebooting the WLC, i was trying to create multiple SSID with different VLAN and cant see AP associating again. Could you please help me.

Sumeet

Re: have one cisco wireless controller CISCO2106

Surendra BG — Thu, 14 Apr 2011 14:20:58 GMT

Hi,

I guess the configurations was not saved.. please add the SSC again to all the APs, save the config on the WLC and this will help you.. I guess you know how to add the SSC..

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Sat, 16 Apr 2011 09:29:03 GMT

Hi, SSC key is saved and its allready there and i am not getting any trap like AP autherization. i think problem with AP only need to reset. that is only possible on monday

Re: have one cisco wireless controller CISCO2106

Surendra BG — Sat, 16 Apr 2011 10:36:14 GMT

wat does the debug say on the WLC??

I guess i hv already provided this doc.. giving you again.. please refer to this or please read this and this will help you!!

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

Regards

Surendra

Re: have one cisco wireless controller CISCO2106

sumeet kumar — Sat, 16 Apr 2011 11:34:51 GMT

Hi,

I just now i logged in WLC and in message log i found this error

Apr 16 03:25:07.883 spam_lrad.c:4162 LWAPP-3-HDR_ENCAP_ERR: Unable to encapsulate LWAPP header for discovery response; AP 00:12:da:c3:49:20
Apr 16 03:25:07.882 apf_net.c:807 APF-3-PDU_ENCAP_FAILED: Failed to encapsulate a PDU for transmission to station00:00:00:00:00:00. Destination IP address not set in L3 mode.
Apr 16 03:25:07.881 spam_lrad.c:4162 LWAPP-3-HDR_ENCAP_ERR: Unable to encapsulate LWAPP header for discovery response; AP 00:12:da:c3:49:20
Apr 16 03:25:07.881 apf_net.c:807 APF-3-PDU_ENCAP_FAILED: Failed to encapsulate a PDU for transmission to station00:00:00:00:00:00. Destination IP address not set in L3 mode.
Apr 16 03:04:18.176 spam_lrad.c:4162 LWAPP-3-HDR_ENCAP_ERR: Unable to encapsulate LWAPP header for discovery response; AP 00:12:da:c3:49:20