topic Re: WLC 5508 in Wireless

WLC 5508

ngengyeong — Sun, 04 Jul 2021 03:02:19 GMT

Hi NetPro.

I have a project to setup a HotSpot Wireless Network. may i know should i include ACS server ?

Your reply will be highly appreciated.

Regards,

Kitten.

Re: WLC 5508

Leo Laohoo — Mon, 04 Apr 2011 05:15:28 GMT

You want to setup a wireless hotspot? How many APs are we talking about? If it's <50 APs when I recommend you look at the new WLC 2500.

If there's nothing to authenticate then you don't need an ACS.

Re: WLC 5508

Surendra BG — Mon, 04 Apr 2011 05:19:18 GMT

Normally HOTSPOTS dont have authentication configured.. So i dont think its needed.. However its your design and if you want you can go for it!!

Regards

Surendra

Re: WLC 5508

ngengyeong — Mon, 04 Apr 2011 06:07:00 GMT

Hi .

Thanks for the information , that means the structure setup will be like this ?

Re: WLC 5508

Surendra BG — Mon, 04 Apr 2011 07:29:44 GMT

the topology looks good!! if you want to configure some ACL so that the hotsopts wil just go out to the Internet, then configure it on the distribution switch or the core to that perticular vlan.

Regards

Surendra

Re: WLC 5508

ngengyeong — Mon, 04 Apr 2011 08:01:19 GMT

Thanks for NetPro.

Re: WLC 5508

sbhadrav@cisco.com — Mon, 04 Jun 2018 07:46:46 GMT

Please check the below link for more information:-
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html#two