topic Re: WLC 4402 Config question. in Wireless

WLC 4402 Config question.

caymil — Sun, 04 Jul 2021 20:16:33 GMT

I have a WLC 4402 that I am using in a wireless testbed. During the initial configuration, I followed the basic configuration guidelines for the L3 LWAPP. Tried to configure the Service-port without an IP(0.0.0.0), but it would not accept it(msg."Service Port Address cannot be set to 0.0.0.0").

Currently, I am running code 3.2.116.21.

Has anyone come across this issue?

Thanks,

Chris

Re: WLC 4402 Config question.

ethiel — Mon, 09 Oct 2006 17:04:05 GMT

I have generally given the service port an IP, even if I don't plan to use it. You could always give it something you will never use like 10.255.255.1 or something similar.

Re: WLC 4402 Config question.

caymil — Mon, 09 Oct 2006 19:04:15 GMT

Ethiel,

Thanks for the info. I have already done this. Just wanted to know if there was another way around it.

Best Regards,

Chris