topic EAP-FAST /w Broadcom NIC in Wireless

EAP-FAST /w Broadcom NIC

dradmacher — Sun, 04 Jul 2021 19:33:38 GMT

I am currently working on setting up a AIR-AP1231G-A-K9 running 12.3(8)JA. I have it configured for EAP-FAST using its local RADIUS server. Everything works perfectly with the Cisco card and client utility. As soon as I try and connect with a Broadcom adapter my AP logs state "Station xxxx.xxxx.xxxx Authentication failed" but my local radius server doesn't report a failed login attempt. It's like when using the Broadcom adapter the request isn't making it to the RADIUS server.

Any help would be appreciated if anyone has any experience with this.

Re: EAP-FAST /w Broadcom NIC

ivillegas — Tue, 11 Jul 2006 17:56:45 GMT

Add a "drop-packet" configuration parameter to the "packet retries <1-128>" configuration item under interface DotRadioX. This should be the line:packet retries 128 drop-packet. This configuration will make the AP drop packets destined for a client if the maximum retry count is reached instead of de-Associating the client which is by default

Re: EAP-FAST /w Broadcom NIC

dradmacher — Wed, 12 Jul 2006 21:39:35 GMT

That diddnt seem to fix the issue... This is my config for the Radio0. Any other ideas?

**********************

interface Dot11Radio0

no ip address

no ip route-cache

encryption mode ciphers tkip

encryption vlan 119 mode ciphers tkip

ssid Icarus

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

packet retries 128 drop-packet

station-role root

bridge-group 1

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

**********************